Westcott FJ80 II M Universal Touchscreen 80Ws Speedlight with Adapter for Cameras - Manual (Page 8)

FJ80 II Speedlight: Warnings
Caution
● IMPORTANT: During operation, the speedlight lens and various components of the FJ80 II
speedlight temperatures may increase. Please use caution while using it to avoid severe burns or
injuries.
● Do not touch the speedlight lens after immediate use to avoid potential injury.
● Use only with the Westcott FJ80 II Lithium Polymer Battery and Charging Base.
● Never leave unattended around children and/or pets.
● Always confirm proper installation, locking, and unlocking when adding or removing from the
camera hot shoe. (NOTE: Failure to completely rotate the dial to lock and unlock could
permanently damage the locking pin.)
● Keep away from fire, water, and moisture.
● Do not submerge in water.
● Avoid drastic temperature changes before, during, or after use.
● Always remove the FJ80 II Lithium Polymer Battery from the FJ80 II Speedlight during
travel/storage to avoid accidental operation, which could lead to overheating or permanent
damage.
● Do not force adjust or add excessive weight to the speedlight head.
● Only use the FJ80 II Speedlight with compatible FJ80 mounts, brackets, modifiers, and/or
accessories.
● Do not attempt to disassemble or modify any Westcott products. Contact Westcott for assistance.
● The operating temperature range is 14°~122°F / -10~50°C).
Dual-Stage Heat Protection System
The FJ80 II is equipped with a self-monitoring system ensuring safe operation during continued
full-power use during a short timeframe.
Stage 1: Once the speedlight reaches an internal operating temperature of 212°F (100°C), the
screen will display a yellow [
OH ]. The recycle time will also increase by 2 seconds in an effort to
cool the unit while allowing for continued operation.
Stage 2: Once the strobe reaches an internal operating temperature of 266°F (130°C), the screen
will display a red
[OH] icon. The recycle time will increase an additional 2 seconds in efforts to
cool the unit while allowing for further operation.
Once the unit has cooled, the yellow or red [ OH] will disappear from the touchscreen, it will then be safe
to continue operation.
7