Westcott FJ80 II M Universal Touchscreen 80Ws Speedlight with Adapter for Cameras - Manual (Page 11)

FJ80 II Speedlight: Attaching & Removing Accessories
Mounting & Removing the FJ80 II Cold Shoe Stand
1. Slide the metal base of the FJ80 II into the cold shoe stand with the touchscreen facing the same
direction as the channel opening on the back of the shoe stand.
2. Rotate the FJ80 II locking dial clockwise (left to right) until it’s securely mounted to the cold shoe
stand.
3. Remove the FJ80 II Speedlight by rotating the FJ80 II locking dial counterclockwise (right to left).
{NOTE: Ensure that the dial has been completely rotated to the left. Otherwise, the locking pin
may be permanently damaged upon removal of the speedlight.}
4. Securely grasp the sides of the FJ80 II Speedlight, gently slide the speedlight towards the rear of
the cold shoe stand and completely remove it from the cold shoe stand.
Attaching & Removing FJ80 Series Magnetic Modifiers [ sold separately ]
1. Ensure the FJ80 II’s articulating flash head and lens are free from obstructions.
2. Grasp the edges of the modifier's magnetic ring, align the magnetic ring with the FJ80 II’s face,
and gently affix it into place. [NOTE: The magnetic ring may require a slight turn to ensure proper
seating].
3. Remove the magnetic modifier by grasping the magnetic ring and pulling away from the
speedlight head.
NOTE: Ensure the FJ80 II has cooled before adding and removing modifiers.
FJ80 II Speedlight: Powering & Testing
Powering On
Long press the Power button for 3-seconds until the digital blue power button appears on the display,
release the Power button, and tap the digital blue power button on the touchscreen.
Powering Off
Long press the Power button for 3-seconds until the FJ80 II turns off.
Test Fire
Quick-press the white Test button [backlit green] once to test-fire the FJ80 II. When the Test button is
pressed, the backlit button will turn from green to red until the speedlight has recharged and is ready for
the next burst.
10