Fj80 ii speedlight: sync functions, Enabling front or rear curtain sync, Enabling ‘hss (high-speed sync) – Westcott FJ80 II M Universal Touchscreen 80Ws Speedlight with Adapter for Cameras User Manual
Page 16: Enabling freeze sync

FJ80 II Speedlight: SYNC Functions
Enabling Front or Rear Curtain Sync
Front or Rear Curtain Sync is ideal in normal scenarios and when color consistency (5500°K ±200),
full-power output (80 Ws), and the fastest recycling are essential.
1. Press the
Sync
selection button repeatedly until three arrows appear in the white square at the
top right of the screen.
2. Front Curtain will show three arrows, with the first arrow filled in white.
3. Rear Curtain will show three arrows, with the third arrow filled in white.
NOTE
:
Utilize HSS (see below) when choosing to use shutter speeds above your camera’s maximum
normal sync speed (typically: 1/200s, 1/250s, or 1/320s ).
Enabling ‘HSS (High-speed Sync)’
High-speed Sync is ideal for mixing a substantial amount of available light and flash when proper
exposure with a shallow depth of field/wide aperture requires a flash sync speed above the camera’s
maximum normal sync speed (typically: 1/200s, 1/250s or 1/320s). HSS allows compatible cameras to
achieve flash sync speed up to 1/8000s.
1. Press the Sync Selection button repeatedly until an H with a lightning bolt appears in the white
square at the top of the screen.
NOTE: HSS requires an FJ-X Transmitter or FJ80 Series Speedlight.
Enabling Freeze Sync
Freeze Sync is ideal for freezing fast-moving objects lit by the speedlight.
[Available in Manual Mode
Only.]
1. Press the physical
Home
button and then tap on the
Settings
menu.
2. Locate the Freeze Setting and tap the
OFF
button until ON appears.
3. Press the
Home
button and select the desired mode.
4. Freeze flash is now enabled.
NOTE: Freeze flash will only work in Front and Rear Curtain Sync.
15