Westcott FJ80 II M Universal Touchscreen 80Ws Speedlight with Adapter for Cameras - Manual (Page 13)

2. When the AF selection is turned OFF , the HSS functionality will perform as normal and will allow
you to change your shutter speed higher than 1/200th of a second. Please note that the HSS
functionality is dependent on whether your camera is listed on the compatibility chart on
https://www.westcott.com/wireless-compatibility.
NOTE: AF Assist Beam functionality is not compatible with all cameras. Review your camera’s owner’s
manual and familiarize yourself with the settings that need to be adjusted to take advantage of this
feature with compatible cameras.
FJ80 II Speedlight: HOST Wireless Operation
Enable HOST Mode
1. Quick-press the physical Home button to return to the Main Menu on the display.
2. Quick-press the digital blue HOST button on the Main Menu to enter HOST Mode.
3. Adjust the touchscreen settings using one of the following methods:
a. Method 1: Press the desired setting’s digital button repeatedly until the desired setting is
visible on the button and/ or touchscreen.
b. Method 2: Quick-press the desired setting’s digital button to highlight the selection and
use the up-and-down arrows to change the settings. Press OK to confirm the selection.
Group SLP (Sleep) Mode [HOST]
FJ Wireless flashes can be placed into SLP (sleep) mode from any FJ Transmitter disabling the unit’s
ability to flash while other flash groups continue operating normally.
1. Determine the Group [A-F] that the CLIENT FJ Wireless Flash Device is assigned to.
2. Press the corresponding FJ80 II’s MODE Function icon continuously until
SLP (sleep) appears on
the display. Note that any flash units assigned to this Group will also enter into SLP (sleep) mode.
3. Exit the SLP (sleep) mode by continually pressing the corresponding FJ80 II’s MODE Function
icon until the screen displays TTL or M .
NOTE: Ensure the Exposure Mode type is updated from the HOST FJ80 II; otherwise, the CLIENT flash
unit(s) will re-enter SLP (sleep) mode once the HOST FJ80 II transmits the next signal to the CLIENT
devices.
Selectable Digital Touchscreen Buttons
Top Section
● Camera Brand Button: [Canon, Nikon, Sony, Fuji, Olympus, Lumix]
● Channel Button (CH): [01-31]
● Group Button (GR): Fixed; The FJ80 II will default and remain in Group A when HOST
mode is enabled.
12