Canon MT-26EX-RT Macro Twin Lite - Manual (Page 77)

77
q : Multiple Flash Photography with Manual Flash Output
4
Set the flash output.
Press function button 3 < 1 > or
< 8 >.
Turn < 9 > to set the flash output,
then press < 8 >.
Repeat steps 3 and 4 to set the flash
output of all groups.
5
Take the picture.
X Each group fires at the set flash
output.
If high-speed sync is set, the setting range will be 1/1 - 1/64.
When < j > is set, set A, B, or C as the firing group for the slave
units. The flash will not fire if it is set to D or E.
To fire multiple slave units with the same flash output, select < j >
in step 2.