Epson 880 - Manual (Page 71)

66
R4C626
short.bk
Rev_D
A5 size DOS.FM
9/8/00 Pass 0
R Proof Sign-off:
Otsuka
_______
N.Nomoto _______
R.Thomson _______
4. Press the
S
load/eject button to print the current default
settings and the next set of instructions in the language that
you selected. The printed instructions include submenu
tables that list all of the settings that you can change and
describe the appearance of the control panel lights for each
selection. Use these instructions to change the settings using
the control panel.
5. After making your changes, exit the default-settings mode by
turning off the printer.
Note:
You may exit the default-settings mode at any time by turning off
the printer. Any settings that you have made remain in effect until
you change them.
If you want to check the current default settings, enter the default-
settings mode again and print the current default settings. The
current settings are indicated with arrows.
Using Built-in and Scalable Fonts
Refer to the appropriate section below.
Using built-in fonts
Your printer has eight built-in character fonts.
The following fonts are available:
EPSON Courier, EPSON Roman T, EPSON Sans Serif H, EPSON
Roman, EPSON San Serif, EPSON Prestige, EPSON Script, and
Draft