Eco information, Information, Osd warning – NEC EA271Q-BK 27" 16:9 IPS Monitor User Manual
Page 25: English
English-23
English
ECO Information
CARBON SAVINGS:
Displays the estimated carbon savings information in kg.
CARBON USAGE:
Displays the estimated carbon usage information in kg. This is the arithmetic estimation, not actual
measurement value.
COST SAVINGS:
Displays the electricity cost savings in balance.
CARBON CONVERT SETTING:
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting
is based on the OECD (2008 Edition).
CURRENCY SETTING:
Displays electricity pricing in 6 currency units.
CURRENCY CONVERT SETTING:
Displays electricity savings in kW/hour (US Currency is default).
NOTE:
This model’s initial setting is “Currency = US$” and its Currency Convert setting = $0.11.
This setting can be changed by using the ECO information menu.
If you want to use the French setting, please refer to the steps below:
1. Touch the Menu key and select the ECO information menu using the “LEFT” or “RIGHT” key.
2. Select the CURRENCY SETTING item by touching the “UP” or “DOWN” key.
3. The French currency unit is Euro ( ). You can adjust currency setting to Euro icon ( ) from
US dollar ($) by touching the “LEFT” or “RIGHT” key in Current setting item.
4. Select CURRENCY CONVERT SETTING by touching the “UP” or “DOWN” key*.
5. Adjust CURRENCY CONVERT SETTING by touching the “LEFT” or “RIGHT” key.
* This initial Euro ( ) setting is based on the OECD data for Germany (2007 Edition).
Please check the receipt of electricity prices for France or OECD data for France.
The French value according to the OECD data (2007 Edition) was 0.12.
Information
Provides information about the current display resolution and technical data. Indicates the model and serial numbers of
your monitor.
OSD Warning
OSD warning menus disappear when EXIT is selected.
NO SIGNAL:
This function gives a warning when there is no horizontal or vertical sync. After power is turned on or
when there is a change of input signal, the
No Signal
window will appear.
OUT OF RANGE:
This function gives a recommendation of the optimized resolution and refresh rate. After the power
is turned on or there is a change of input signal or if the video signal doesn’t have proper timing, the
Out Of Range
menu will appear.