NEC EA271Q-BK 27" 16:9 IPS Monitor - Manual (Page 16)

English-14
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
as follows:
1 Ambient Light Sensor
Human Sensor Detects the level of ambient lighting and the presence of a user, allowing the monitor to
make adjustments to various settings resulting in a more comfortable viewing experience.
Do not cover this sensor.
2 INPUT/SELECT Changes the input source when not in the OSD menu. Enters sub menus when in the OSD
menu. You can directly change to L/B (LOW BLUE LIGHT) mode by touching the INPUT key
for 3 seconds or more.
3 MENU/EXIT Opens the OSD menu. Exits the OSD sub menus and main menu.
4 LEFT/RIGHT/
UP/DOWN*
2
Navigates through the OSD menu.
When the OSD menu is off, touch one of the following keys to open the menu for the function
indicated:*
1
UP key: BRIGHTNESS
DOWN key: VOLUME
RIGHT key: USB SELECTION
5 /RESET When the OSD menu is displayed on the screen, this button works as a reset command for
the OSD settings.
When the OSD menu is not displayed on the screen, this button works as a select function for
the MULTI PICTURE settings.*
3
You can swap pictures between a main screen and a sub screen by touching the /RESET
key for 3 seconds or more while Main or Sub is set in MULTI PICTURE.* 1, * 4
6 Power Turns the monitor on and off.
7 Power LED Indicates that the power is on or off.
* 1 When the Hot Key function is OFF, this function is disabled.
* 2 Depending on the OSD ROTATION setting, LEFT, RIGHT, UP and DOWN key guides are displayed at the , , , keys
differently (See page 20 ).
* 3 MULTI PICTURE menu.
Touch the LEFT/RIGHT to select a priority (adjustable) screen. When MULTI PICTURE is OFF, a single screen will be
displayed.
* 4 Swapping of picture by picture is not supported. The sound keeps the value of SOUND INPUT setting.
The expansion keeps the values of EXPANSION setting of each input.