NEC EA271Q-BK 27" 16:9 IPS Monitor - Manual (Page 17)

English-15
English
ECO TOOLS
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.
CONTRAST
Adjusts the overall image and background screen brightness by input signal level.
NOTE: CONTRAST and DV MODE can be adjusted for all COLOR CONTROLS except L/B.
ECO MODE
Decreases the amount of power consumption by reducing the brightness level.
OFF: Does not function.
1: Sets the brightness variable range from 0% to 70%.
This setting can adjust brightness to a range in which power is reduced by 10% compared to the maximum brightness
setting.
2: Sets the brightness variable range from 0% to 30%.
This setting can adjust brightness to a range in which power is reduced by 30% compared to the maximum brightness
setting.
When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.
NOTE: This function is disabled when DV MODE is set to DYNAMIC.
This function is disabled when Color Control System is set to DICOM SIM.
This function works only when MULTI PICTURE is off.
AUTO BRIGHTNESS
OFF: Does not function.
ON (AMBIENT LIGHT): Automatically adjusts the brightness to the optimal setting by detecting the brightness level of
the environment*
1 .
*1: Please refer to page 33 for full “Auto Brightness” information.
NOTE: This function is disabled when DV MODE is set to DYNAMIC.
This function is disabled when Color Control System is set to DICOM SIM.
This function works only when MULTI PICTURE is off.
BLACK LEVEL
Adjusts the brightness level of black when displayed on screen.
OFF MODE SETTING
The Intelligent Power Manager allows the monitor to enter into power saving mode after a period of inactivity.
The OFF MODE has two settings:
OFF: The monitor enters into power saving mode automatically when the input signal is lost.
ON: The monitor enters into power saving mode automatically when the amount of surrounding light goes below the
level determined by you. The level can be adjusted in the OFF MODE sensor setting.
When in power saving mode, the LED on the front of the monitor becomes dark blue. When in power saving mode,
touch any of the front keys, except for POWER and INPUT/SELECT key, to return to normal mode.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.
SENSOR SETTING (OFF MODE SETTING)
Adjusts the threshold level for the ambient light sensor for detecting low light conditions and shows the current sensor
measurement result.
START TIME (OFF MODE SETTING)
Adjusts the wait time to enter into to a lower power consumption level when the ambient light sensor detects low light
conditions.