HP Z32 31.5" 16:9 4K UHD IPS Display (Smart Buy) - Manual (Page 9)

Rear components
Component Function
1 Function buttons Use these buttons to navigate through the OSD menu based on the
indicators above the buttons that are activated while the OSD menu is open.
NOTE: You can assign the Function buttons in the OSD menu to quickly
select the most commonly used operations. See Assigning the Function
buttons on page 14 for more information.
2 Power button Press the button to turn the monitor on or off.
3 Master power switch Turns on or off all power to the monitor.
NOTE: Putting the switch in the Off position will yield the lowest power
state for the monitor when not in use.
4 Power connector Connects a power cord.
5 VESA release button Releases the stand from the monitor.
6 HDMI port Connects the HDMI cable from the source device to the monitor.
7 Mini DisplayPort port Connects the Mini DisplayPort cable from the source device to the monitor.
8 DisplayPort port Connects the DisplayPort cable from the source device to the monitor.
9 Audio-out jack Connects optional powered stereo speakers or a television audio cable.
10 USB Type-C port
(upstream)
Connects a USB Type-C cable to a source device.
11 USB Type-A ports (2)
(downstream)
Connect the USB hub cable from the source device to the monitor.
12 Security cable slot Connects a security cable to a stationary object.
NOTE: The security cable is designed to act as a deterrent, but it may not
prevent the monitor from being mishandled or stolen.
13 USB Type-A port
(downstream)
Connects an optional USB device to the monitor.
Product features and components 3