beautypg.com

Using auto-sleep mode, Using low blue light mode (select products only), Adjusting blue light output (select products only) – HP P22 G5 21.5" Monitor User Manual

Page 27

background image

When in sleep mode, to comply with international power standards, the monitor default setting is Power

Saver mode.

If your monitor supports Performance mode, to keep the USB ports enabled when the monitor is in Auto-Sleep

Mode, change the Power Mode setting from Power Saver to Performance.

NOTE:

If you are connecting a computer that is not battery powered, you must change the Power Mode

setting to Performance mode.

To change the power mode setting:

1.

Press the

Menu

button to open the OSD menu.

2.

Select Power, select Power Mode, and then select Performance.

3.

Select Back and close the OSD.

Using Auto-Sleep Mode

Your monitor has an energy-saving feature called Auto-Sleep Mode, a reduced power state. This section

describes how to activate or adjust Auto-Sleep Mode on your monitor.

When Auto-Sleep Mode is enabled (enabled by default), the monitor enters a reduced power state when the

computer signals low power mode (absence of either horizontal or vertical sync signal).

Upon entering this reduced power state (Auto-Sleep mode), the monitor screen is blanked, the backlight turns

off, and the power light turns amber. The monitor draws less than 0.5 W of power when in this reduced power

state. The monitor wakes from Auto-Sleep mode when the computer sends an active signal to the monitor

(for example, when you activate the mouse or keyboard).

To disable Auto-Sleep Mode in the OSD:

1.

Press the

Menu

button to open the OSD, or press the center of the joypad OSD button to open the OSD.

2.

In the OSD, select Power.

3.

Select Auto-Sleep Mode, and then select Off.

Using low blue light mode (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes.

When the low blue light mode is enabled, this monitor's low blue light panel is certified by TÜV to reduce blue

light output and create a more relaxing and less stimulating image while you read content on the screen.

Adjusting blue light output (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor

allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating

image while you read content on the screen.

To adjust the blue light output from the monitor:

Using Auto-Sleep Mode

21