HP P22 G5 21.5" Monitor User Manual
Page 20

3.
Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the other
end to the USB Type-C port on the source device.
NOTE:
The monitor’s USB Type-C port provides data, video, and power delivery (up to 65 W). The host
device must be able to support DisplayPort Alt Mode (video, charging, and USB) over the USB Type-C
connector.
4.
Connect one end of the power cord to the power connector on the monitor and the other end to a
grounded AC outlet.
WARNING!
To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one can
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord
from the AC outlet, grasp the cord by the plug.
14
Chapter 1 Getting started