HP P22 G5 21.5" Monitor - Manual (Page 18)

1. Press the latch (1), and then lift up the cover (2) to remove the VESA cover from the rear of the monitor.
2. Remove the four screws from the VESA holes located on the rear of the monitor head.
3. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the VESA screw holes on the back of the monitor
head.
IMPORTANT: If these instructions do not apply to your device, follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
Connecting the cables
In addition to details about how to connect a cable, this section contains information about how your monitor
functions when you connect certain cables.
12 Chapter 1 Getting started