Electrolux EKC6047 - Manual (Page 42)

42
electrolux installation
How to finish unpacking
•
Place packed appliance next to the
space in which it will be installed.
•
Remove the appliance packing
except for bottom tray, which
should be left in position until the
appliance is ready to be fitted into
its cabinet.
•
NOTE: It is imperative that the
appliance is left in the base to
protect both the appliance and
the floor.
•
Ensure the user is given these
operating instructions.
Important: Switch off at the mains,
miniature circuit breaker and if
appropriate, remove fuse before
commencing any electrical work.
To remove cover of mains terminal
From the rear of the appliance, remove
mains input terminal cover to gain
access to terminal block.
•
First remove retaining screw with
pozidrive screwdriver.
•
Prise cover loose using screwdriver
in position (1) then lever off with
screwdriver in position (2) at either
side.
•
Lift cover and remove screw from
cable clamp.
Hook clamp
under here
Cable
clamp