Electrolux EKC6047 - Manual (Page 40)

40
electrolux installation
Note: House circuit
Earth leakage and continuity tests must
be carried out before the appliance is
connected to the mains supply and re-
checked after fitting.
Choice of electrical connection
•
The appliance should be operated
using at least 6mm
2
twin core and
earth PVC insulated mulit core
cable. Please choose from the
most appropriate after reading the
different methods:-
•
By connecting the appliance to a
cooker point (having a double pole
isolating switch with at least 3mm
contact separation in all poles) and
protected with a fuse or miniature
circuit breaker at your mains fuse
box.
•
If you wish to connect an oven and
a hob to a cooker point you can.
Oven and hob units should be
separately connected to a cooker
point.
Cooker point
Oven
Hob
Note: It is good practice to :
•
Fit an Earth Leakage Circuit
Breaker to your house wiring.
•
Wire your appliance to the latest
IEE regulations.
Preparing cabinet for fitting of oven
•
Make sure that the cabinet is the
correct size for the appliance to be
fitted.
•
If the size is between 565-570mm,
then the cabinet should be
modified so that at the screw fixing
points the recommended
dimension of at least 560-565mm
is maintained. The modification
should ideally be localised to
ensure that after screw fitment the
oven is securely fixed into position.
•
The cabinet must be stable and
level by firmly securing it to the wall
or floor. If necessary, make
arrangements to ensure the shelf
upon which the oven will rest is
level.
•
When the appliance is installed
ensure a minimum gap of 2mm is
maintained between the trim on
the bottom edge of the appliance,
and any corresponding door /
panel underneath.