Electrolux EKC6047 - Manual (Page 36)

36
electrolux care and cleaning
If the door glass panel becomes
chipped or has deep scratches the
glass will be weakened and must
be replaced to prevent the
possibility of the panel shattering.
Please contact your local service
force centre who will be pleased to
advise further.
To replace the inner door glass
Holding the glass panel in your right
hand fully open the oven door with your
left.
Gently ease and push the glass into
the location points under the handle
before lowering and sliding the glass
into position under the hinge location
points at the rear.
Ensure the glass is properly located
and the text 'Top' is facing towards
you and at the top edge of the door.
Do not attempt to use the oven
without the glass being in place.
Replacing an oven light bulb (main
oven)
The type of bulb required is a 300°C 25
watt small Edison Screw.
Disconnect the appliance from the
electricity supply before replacing
the bulb.
1. Make sure the appliance is cool
before replacing the bulb.
2. Open the oven door and remove
the shelves and wirework runners.
3. Pull the glass bulb cover towards
you and then pull it off. If necessary,
use a screwdriver to carefully lever
off the cover, taking care not to
damage the oven cavity.
4. Unscrew the bulb by turning it to
the left.
5. Fit a new bulb and then replace the
glass bulb cover.
6. Refit the wirework runners and
replace the shelves.
7. Restore the electricity supply and
reset the time of day.