5. making use of usb (universal serial bus), Required system environment – Eizo ColorEdge CG2420 24" 16:10 Hardware Calibration IPS Monitor User Manual
Page 42
- 42 -
Chapter 6 Reference
6-5. Making Use of USB (Universal Serial Bus)
This monitor is equipped with a USB hub. It works as a USB hub when connected to a USB-compatible PC, allowing the connection of peripheral USB devices.
Note
•
This product supports USB 3.0. When connecting peripheral devices that support USB 3.0, high-speed data communication is possible (however, only when the USB cable used
to connect the PC and peripheral device is USB 3.0 compliant).
•
The “CHARGE” USB downstream port also supports quick charging. This allows you to recharge your smartphone or tablet in a short period of time. (See
)
●
Required System Environment
•
A PC equipped with a USB port
•
Windows 10 / Windows 8.1 / Windows 8 / Windows 7, or Mac OS X 10.7.5 or later
•
EIZO USB cable (UU200SS (USB 3.0))
Attention
•
This monitor may not work depending on the used PC, OS or peripheral devices. For USB compatibility of peripheral devices, contact their manufactures.
•
When the monitor is in power saving mode, devices connected to the USB downstream port will still work. Therefore, power consumption of the monitor varies depending on
the connected devices, even in the power saving mode.
•
When the main power of the monitor is off, a device connected to the USB downstream port will not operate.
•
When the “USB CHARGE Port” setting in “Preferences” is set to “Charging Only”, a peripheral device will not work if connected to the “CHARGE” port.
•
Ensure that communication between all peripheral devices connected to the monitor and the PC is ended before switching the “USB CHARGE Port” setting. When the
setting is switched, all communication will be temporarily interrupted.