Eizo ColorEdge CG2420 24" 16:10 Hardware Calibration IPS Monitor - Manual (Page 23)

- 23 -
Chapter 3 Advanced Adjustments/Settings
Function
Input Signal
(The setting range of each function
differs depending
on the input signal.)
√: Settable -: Not settable
Adjustable
range
Description Note
DVI DisplayPort HDMI
Picture Expansion √ √ √ Auto *1
Full Screen
Aspect Ratio
Dot by Dot
The screen size of the monitor display can be changed.
• “Auto”
The monitor automatically changes the screen size
according to the resolution information and aspect ratio
information sent from the input signal.
• “Full Screen”
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 16:9
aspect ratio.
• “Aspect Ratio”
Displays an image in full screen. However, since aspect
ratios are maintained, part of an image may not be visible
in horizontal or vertical direction.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 4:3
aspect ratio.
• “Dot by Dot”
Displays the image at the set resolution or at the size
specified by the input signal.
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot (input signal)
Input Color Format -
(Fixed
RGB)
√ √ Auto *2
YUV 4:2:2
YUV 4:4:4
RGB
The color space of the input signal can be specified.
Try changing this setting if colors are not displayed correctly.
-
*1 Only enabled when input signal information for automatically determining the setting is detected during HDMI input
*2 Only enabled when input signal information for automatically determining the setting is detected