Eizo ColorEdge CG2420 24" 16:10 Hardware Calibration IPS Monitor User Manual
Page 24
- 24 -
Chapter 3 Advanced Adjustments/Settings
Function
Input Signal
(The setting range of each function
differs depending
on the input signal.)
√: Settable -: Not settable
Adjustable
range
Description
Note
DVI
DisplayPort
HDMI
Input Range
√
√
√
Auto
*3
Full
Limited
(109% White)
Limited
Depending on the external device, the black and white levels
in the video signal output to the monitor may be restricted. If
the signal is displayed on the monitor in its restricted form, the
blacks will be faint, the whites dull, and contrast will be re-
duced. The brightness range of such signals can be extended
to match the actual contrast ratio of the monitor.
•
“Auto”
The monitor automatically recognizes the brightness
range of input signals and displays images appropriately.
•
“Full”
The input signal brightness range is not extended.
•
“Limited (109% White)”
The brightness range of the input signal is extended from
64 - 1019 to 0 - 1023 for display.
•
“Limited”
The brightness range of the input signal is extended from
64 - 940 to 0 - 1023 for display.
-
Noise Reduction
-
-
√
On
Off
The small noises that occur in dark areas of an image are
reduced. Use this function to reduce noise and roughness in
images.
•
Using the Noise Reduction
function may lead to dete-
rioration of fine images.
*3 Only enabled during DisplayPort input or HDMI input