AG Neovo MD-2402 24" Full HD Clinical Review Monitor - Manual (Page 28)

28
ADJUSTING THE LCD MONITOR
5.5 System Setting
1. Press the key to call out the OSD window.
2. Press the
or key to select and press the key to enter the System menu.
System
Input Select Auto
DDC/CI On
Reset No
Information
Resolution:
H.Frequency:
V.Frequency:
1440(H)x 900(V)
55KHz
60Hz
AUTO :Exit MENU :Select :Move
Input Select Auto
DDC/CI On
Reset No
Information
Resolution:
H.Frequency:
V.Frequency:
1440(H)x 900(V)
55KHz
60Hz
System
AUTO :Exit MENU :Select :Move
3. Press the or key to select a submenu item and press the key to enter its settings.
Item Function Operation Range
Input Select Switches the input source when two input
signals are connected.
Press / to select the
setting.
Auto
VGA
HDMI
DisplayPort
DDC/CI Activates the DDC/CI protocol to allow users
to configure the monitor by a software using
two wires on the VGA, HDMI, DisplayPort
cables.
On
Off
Reset Resets all your customized settings to the
factory defaults. Yes
No
Information Displays the information of the input source
such as resolution, horizontal frequency, and
vertical frequency.
- -