Chapter 3: using the lcd monitor, 1 turning on the power 3.2 selecting a source, 1 turning on the power – AG Neovo MD-2402 24" Full HD Clinical Review Monitor User Manual
Page 17: 2 selecting a source
17
CHAPTER 3: USING THE LCD MONITOR
3.1 Turning on the Power
1. Connect the power adapter to the DC power input at the rear of the LCD monitor.
2. Connect the power cord plug to a power outlet or a power supply.
3. Press the key on the control panel.
Power Key
When the LCD monitor is turned on, press the key to turn off the LCD monitor.
Note:
The LCD monitor still consumes power as long as the power cord is connected to the power outlet.
Disconnect the power adapter to completely cut off power.
3.2 Selecting a Source
Press the
key to call out the source selection menu.
VGA
HDMI
DisplayPort
Source Key
The following menu appears on the screen:
VGA
HDMI
DisplayPort
Chapter 3: Using the LCD Monitor