AG Neovo MD-2402 24" Full HD Clinical Review Monitor - Manual (Page 13)

13
PRODUCT DESCRIPTION
1.3 Overview
1.3.1 Control Panel and Indicator
MD-2402 MD-2702
1
2
3
4
5
6
1
2
3
4
5
6
1
AUTO/SOURCE/EXIT ( ): Hot Key: Source Key
• When OSD menu is OFF, press and hold the keypad keys listed below for at least 3 seconds
to activate the Auto Adjustment function (for VGA input signal source).
• When OSD menu is OFF, press to select input when connecting input cable.
• When OSD menu is ON, press to exit the OSD menu.
2
UP ( ):
When the OSD is ON, navigate through adjustment icons or adjust a function.
3
DOWN ( ): Hot Key: PICTURE MODE Select
• When OSD menu is OFF, activate the PICTURE MODE Select.
• When OSD menu is ON, navigate through adjustment icons or adjust a function.
4
MENU/ENTER ( ):
Active OSD menu, function adjust confirm, or Exit OSD menu.
5
POWER ( ):
Press to switch the display on or off.
6
Power status indicator: Indicates the operating status of the monitor:
• Blue – Power On mode.
• Blinking Blue – Standby mode.
• LED off – Off mode.