AG Neovo MD-2402 24" Full HD Clinical Review Monitor - Manual (Page 23)

23
CHAPTER 5: ADJUSTING THE LCD MONITOR
5.1 Brightness Setting
1. Press the key to call out the OSD window.
2. Press the
or key to select and press the key to enter the Brightness menu.
Brightness
Contrast 50
Brightness 40
Picture Mode Standard
DCR Off
Overdrive Off
AUTO :Exit MENU :Select :Move
Contrast 50
AUTO :Exit MENU :Select :Move
Brightness
Brightness 40
Picture Mode Standard
DCR Off
Overdrive Off
3. Press the or key to select a submenu item and press the key to enter its settings.
Item Function Operation Range
Contrast Adjusts the difference between the black
level and the white level.
Note: If the Picture Mode is set to DICOM
and/or DCR is enabled, then the Contrast
cannot be adjusted.
Press / to adjust the
value. 0 to 100
Original Setting High Setting Low Setting
Brightness Adjusts the luminance of the screen image.
Note: If Picture Mode is set to DICOM and/or
DCR is enabled, then the Brightness cannot
be adjusted.
Press / to adjust the
value. 0 to 100
Original Setting High Setting Low Setting
Chapter 5: Adjusting the LCD Monitor