Erica Synths EDU DIY EG Eurorack Module Kit User Manual
Page 51
51
Congratulations!
You have completed the assembly of the mki x es.edu Envelope
module!
It does not need any calibration and, if assembly is correct, it should work
straight away. Connect it to your eurorack power supply and switch it on. If there’s no
"magic smoke”, it’s a good sign that your build was successful. Flip the
switch to the
LOOP mode
and check if the LED is blinking. If it is, adjust Attack and Release settings
to see if turning the potentiometers clockwise
decreases the LED blinking
frequency.
If you consider making slowly evolving drone music, you can install an optional C11 (not
included in the kit), which will double the Attack and Release time.
Enjoy!