Erica Synths EDU DIY EG Eurorack Module Kit - Manual (Page 4)

A few regular potentiometers . The specific values
(which may be encoded & printed onto their bodies) are
1M (A105) x2
100k (A104) x1
A switch . The specific model (which you can identify by
the number of connectors on its underside) is
Single pole, double throw x1
An LED (light emitting diode) . The specific model
(which you can identify by measuring the body’s width)
is
3mm (red) x1
A bunch of jack sockets . The specific models (which
you can identify by their color) are
Switched mono (black) x3
A couple of chips . The specific models (which are
printed onto their bodies) are
TL072 (dual op amp) x3
You will also find a few sockets that are only relevant when assembling the module in the
end.
4