Setting up monitoring using snmp – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual

Page 66

Setting Up Monitoring Using SNMP

Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.

Press the

Menu

button.

Select the

Network

menu and press

Enter

Select

Network Configuration

and press

Enter

Select the

Notifications

menu and press

Enter

Turn on the

SNMP

setting.

Enter up to two IP addresses to receive SNMP notifications as the

Trap IP Address

setting, using 0

to 255 for each address field.

Note:

To enter the IP address using the numeric keys on the remote control, press and hold the

Num

button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x

is a number from 0 to 255).

Select the

Others

menu and press

Enter

If you want to use the Secure HTTP protocol to encrypt communication when using Web Control,
turn on the

Secure HTTP

setting and import the web server certificate using the

Web Server Cert.

setting.

If available, select the

Priority Gateway

setting for your network.