Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual

Page 209

209

Solutions When You Cannot Access the Projector Through the Web

If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.

• For the user ID, enter

EPSONWEB

. (You cannot change the user ID.)

• For the password, enter the password set in the projector's Network menu. The default password is

admin

• Make sure you have access to the network the projector is on.

• Make sure you enter the projector's IP address in the web browser address bar.

• If your Web browser is set up to connect via a proxy server, the

Epson Web Control

screen cannot

be displayed. Make settings for a connection without using a proxy server.

Note:

The user ID and password are case sensitive.

Parent topic:

Solving Network Problems

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:

• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the

projector, it cannot send an e-mail.)

• Make sure you set up the projector e-mail alert settings correctly on the projector's network

Notifications menu or in the network software.

• Set the

Standby Mode

setting to

Communication On

so the network software can monitor the

projector in standby mode.

Parent topic:

Solving Network Problems

Related references

Projector Setup Settings - ECO Menu