Shutting off the picture and sound temporarily – Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual
Page 81
81
You see this screen:
Note:
Linked devices are indicated in blue.
7.
Select the device you want to control and project images from, and press
Enter
.
8.
Select the following HDMI link options as necessary:
•
Audio Out Device
: select whether to output audio from the internal speakers or a connected
audio/video system.
•
Power On Link
: select what happens when you turn on the projector or linked device. Select
PJ -
> Device or Bidirectional
to turn the linked device on when the projector is turned on, or
Device -
> PJ or Bidirectional
to turn the projector on when the linked device is turned on.
•
Power Off Link
: select whether linked devices are turned off when the projector is turned off.
•
Link Buffer
: turn on to improve the performance of the linked operations by changing the settings
if the HDMI Link feature is not working correctly.
9.
When you are finished, press
Esc
.
Parent topic:
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.