Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual

Page 138

138

• Make sure all the cables are securely connected to the projector and your video device. If you

connected long cables, try connecting shorter cables.

• Make sure the

Light Output

setting in the Image menu is set correctly.

• Position the projector close enough to the screen.

• If the above solutions do not correct your image, try resetting all of the projector's settings using the

Reset menu.

Parent topic:

Solving Image or Sound Problems

Related concepts

Projector Placement

Related references

Solutions When a 3D Image Does Not Display Correctly

If a 3D image does not display correctly, try the following solutions:

• Make sure the

3D Display

setting on the Signal menu is set to

Auto

• Make sure your video device and media are both 3D-compatible. Refer to the documentation that

came with your video device for more information.

• Make sure you are using an HDMI cable that supports 3D signals.

• Make sure you selected the correct

3D Format

setting on the Signal menu. Normally this should be

set to

Auto

, but in some cases you may need to select a different setting to match the 3D signal from

your video device.

• Make sure you are using RF 3D active shutter glasses.

• Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby

mode, turn them off and then back on.

• Make sure your 3D glasses are paired with the projector.

• Adjust the

3D Depth

and

3D Brightness

settings on the Signal menu. If the setting is too high, you

may have 3D crosstalk or image ghosting.

• Make sure you are within the 3D viewing range.

• Make sure your screen size matches the

Diagonal Screen Size

setting on the Signal menu.