Solutions when "no signal" message appears, Displaying from a pc laptop – Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual

Page 133

133

Related references

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the

Source

button on the projector's control panel or remote control repeatedly to cycle

through the available sources. Wait a few seconds for an image to appear on each source you cycle
through.

• Press the

Home

button on the projector's control panel to select from a list of available sources

(shown in black text).

• Turn on the connected computer or video source, and press its play button to begin your presentation,

if necessary.

• Check the connection from the projector to your video sources.

• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

• If necessary, turn the projector and the connected computer or video source off and then on again.

• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.

• Try a different video cable.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the

Reset

menu.

Parent topic:

Solving Image or Sound Problems

Related concepts

Projector Connections

Related tasks

Selecting an Image Source

Displaying From a PC Laptop

If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to
display on an external monitor.