Epson Home Cinema 4010 Pixel-Shifted UHD 3LCD Home Theater Projector User Manual

Page 86

Note:

Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus

before you use the Panel Alignment feature. For best results, project an image sized at least 60 inches
(152 cm) diagonally in a dark room and on a projection surface that is not colored or textured.

Note:

You can only adjust the red or blue color convergence. Green is the standard color panel and

cannot be adjusted.

Turn on the projector.

Press the

Menu

button.

Select the

Extended

menu and press

Enter

Select the

Display

setting and press

Enter

Select the

Panel Alignment

setting and press

Enter

Select the

Panel Alignment

setting and press

Enter

Select

and press

Enter

Select the

Select Color

setting and choose one of the following:

•

to adjust the red color convergence.

•

to adjust the blue color convergence.

Select the

Pattern Color

setting and press

Enter

10. Select the pattern you want to use and press

Enter