Solutions when "no signal" message appears – Epson Home Cinema 4010 Pixel-Shifted UHD 3LCD Home Theater Projector User Manual

Page 136

136

• Adjust the

Brightness

setting or select the

Normal

Power Consumption setting.

• Check the

Display

setting to make sure

Messages

is set to

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the

Reset

menu.

Parent topic:

Solving Image Problems

Related references

Related tasks

Unlocking the Projector's Buttons

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the

Source

button on the projector repeatedly to cycle through the available sources. Wait a

few seconds for an image to appear.

• Press a source button on the remote to select an available source. Wait a few seconds for an image to

appear.

• Press the

Home

button on the remote control to select from a list of available sources.

• Turn on the connected computer or video source, and press its play button to begin your presentation,

if necessary.

• Check the connection from the projector to your video sources.

• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

• If necessary, turn the projector and the connected computer or video source off and then on again.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the

Reset

menu.

Parent topic:

Solving Image Problems