Epson Lighting Track Mount for LightScene EV-105 (Black) - Manual (Page 17)

Installation Procedure
16
Installing the Safety Wire
Install the safety wire supplied to the projector to prevent the projector from falling.
Caution
Attach the wire firmly so that it cannot come loose.
a
Attach the wire hook mount supplied with the projector to the ceiling.
c •
When installing the wire hook mount, use commercially available wood screws with a nominal
diameter of 3.8 mm (0.15 inch).
• Make sure that the wood screws enter at least 20 mm (0.8 inch) into the ceiling's underlay.
b
Loosen the carabiner for the safety wire supplied with the projector.
c
Insert the loosened carabiner through the hole in the plate unit, and then tighten it.