Metering mode – Sony BRAVIA XR A90K 42" HDR 4K UHD OLED TV User Manual
Page 96
Digital Still Camera
DSC-RX0M2
Metering Mode
Selects the metering mode that sets which part of the screen to measure for determining the exposure.
Menu item details
Multi:
Measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the
entire screen (Multi-pattern metering).
Center:
Measures the average brightness of the entire screen, while emphasizing the central area of the screen (Center-
weighted metering).
Spot:
Measures only the central area (Spot metering). This mode is suitable for measuring light on a specified part of the entire
screen. The size of the metering circle can be selected from [Spot: Standard] and [Spot: Large]. The position of the
metering circle depends the setting for [Spot Metering Point].
Entire Screen Avg.:
Measures the average brightness of the entire screen. The exposure will be stable even if the composition or the position
of the subject changes.
Highlight:
Measures the brightness while emphasizing the highlighted area on the screen. This mode is suitable for shooting the
subject while avoiding overexposure.
Hint
When [Spot] is selected and [Focus Area] is set to either [Flexible Spot] or [Expand Flexible Spot] while [Spot Metering Point] is
set to [Focus Point Link], the spot metering point can be coordinated with the focus area.
When [Multi] is selected and [Face Priority in Multi Metering] is set to [On], the camera measures brightness based on detected
faces.
When [Metering Mode] is set to [Highlight] and the [D-Range Optimiser] or [Auto HDR] function is activated, the brightness and
the contrast will be corrected automatically by dividing the image into small areas and analyzing the contrast of light and shadow.
Make settings based on the shooting circumstances.
Note
The setting is fixed to [Multi] in the following shooting modes:
[Intelligent Auto]
[Superior Auto]
Zoom functions
In [Highlight] mode, the subject may be dark if a brighter part exists on the screen.
Related Topic
Spot Metering Point
Face Priority in Multi Metering
MENU →
(Camera Settings1) → [Metering Mode] → desired setting.
1
96