Sony BRAVIA XR A90K 42" HDR 4K UHD OLED TV - Manual (Page 236)

Help Guide
Digital Still Camera
DSC-RX0M2
Controlling multiple cameras from a smartphone via Wi-Fi using an access point
(Multiple connections)
With Imaging Edge Mobile, you can use a smartphone to control multiple cameras. This lets you control even six or more
cameras simultaneously. You can control up to 50 cameras.
You will need to update Imaging Edge Mobile to Ver.7.2 or later if you want to use this function.
With multiple connections using an access point, all the cameras are set as “clients” and connected to the access point
via Wi-Fi. The cameras communicate with the smartphone through the access point, to which the smartphone is also
connected via Wi-Fi.
(A): Smartphone
(B): Access point
(C): Cameras (clients)
Only the DSC-RX0M2 can be connected as a client.
On each camera that you want to connect, select MENU → (Network) → [Ctrl w/ Smartphone] and set as
follows.
[Ctrl w/ Smartphone]: [On]
[
Connection Type]: [Multi (Client)]
If the camera has been connected to an access point as a client before, the camera will connect to the previous
access point automatically.
If you are connecting the camera as a client for the first time, or if the camera cannot be connected to the previous
access point, you will need to set the access point.
Perform the following procedure.
1
Connect the camera to the access point (only for the first time).
You need to set an access point for the smartphone control function separately from the access point for [Send
to Computer] or [View on TV].
2
236