Sony BRAVIA XR A90K 42" HDR 4K UHD OLED TV User Manual

Page 126

Digital Still Camera

DSC-RX0M2

Capturing a standard white color to set the white balance (custom white balance)

In a scene where the ambient light consists of multiple types of light sources, it is recommended to use the custom white
balance in order to accurately reproduce the whiteness.
You can register 3 settings.

Note

The message [Capturing of the custom WB failed.] indicates that the value is in the unexpected range, for example when the
subject is too vivid. You can register the setting at this point, but it is recommended that you set the white balance again. When
an error value is set, the indicator

turns orange on the recording information display. The indicator will be displayed in

white when the set value is in the expected range.

Select MENU →

(Camera Settings1) → [White Balance] → Select from among [Custom 1] to [Custom

3], and then press the right button.

Select

, and then press the

(Enter) button.

Hold the product so that the white area fully covers the circle located in the center of the screen, and then
press the

(Enter) button.

The calibrated values (Color Temperature and Color Filter) are displayed and registered.

You can display the fine adjustment screen and perform fine adjustments of the color tones as required by
pressing the right button.

Press the

(Enter) button.

The monitor returns to the recording information display while retaining the memorized custom white balance
setting.

The registered custom white balance setting will remain memorized until overwritten by the another setting.

126