Sony X85K 50" 4K HDR Smart LED TV - Manual (Page 33)

33
Recording
Cha
p
te
r 4
B
a
s
ic
O
per
at
io
ns
Recording
This section describes the example of recording input
signals from port A to the SRMemory card in slot M1.
1
Insert the SRMemory card in slot M1.
The slot indicator lights up blue.
2
Select port A with the corresponding PORT SELECT
button.
The PORT SELECT button of port A lights up and a
border appears around port A in the four-port display
screen. The video of the input signal from port A is
displayed in the preview area in the screen.
3
Select M1 with the corresponding memory selection
button.
A list of files in the SRMemory card appears in the
screen.
4
Press the PLAY button while holding down the REC
button.
The input signal from port A is recorded to the
SRMemory card. During recording, “
z ” is displayed
in the port A area in the screen. Also, the indicator
below the PORT SELECT button and the indicator for
the SRMemory slot are lit red. (If the SRMemory card
is played back at the same time, the indicator turns
amber.)
5
Press the STOP button when you want to stop
recording.
Recording simultaneously to one
SRMemory card
The input signal from another port can be simultaneously
recorded to the SRMemory card during recording. To
record simultaneously, select the SRMemory card that is
already being used for recording in step 3 of the procedure
above.
When multiple SRMemory cards, input and output ports
are used to record or play back files simultaneously, some
functions are limited depending on the SRMemory card
type used or the port configuration. For details, see
“Restrictions on Simultaneous Recording and Playback”
(page 55)
.
Note