Sony PCK-LG3 Glass Screen Protector for a7R V - Manual (Page 15)

15
Zooming
Press either of the ZOOM buttons.
When you perform pan/tilt operation while the camera is
in the telephoto mode, the moving speed of the image on
the screen may be a little jerky.
Operating Multiple Cameras with
the Infrared Remote Commander
1
Set the IR SELECT switch on the rear of the camera
you want to operate to 1, 2 or 3.
2
Press the CAMERA SELECT button on the infrared
remote commander that corresponds to the number
set in step 1.
Then, you can operate the camera(s) specified by number.
Every time you operate the camera(s) using the infrared
remote commander, the CAMERA SELECT button
pressed in step 2 lights.
Adjusting the Camera
Focusing on a Subject
Focusing the camera on a subject
automatically
Press the AUTO button.
The camera focuses on the subject at the center of the
screen automatically.
Focusing the camera on a subject
manually
After pressing the MANUAL button, press either the
FAR or the NEAR button to have the camera focus on the
subject.
Shooting with Back Lighting
When you shoot a subject with a light source behind it, the
subject becomes dark. In such a case, press the BACK
LIGHT button.
To cancel the function, press the BACK LIGHT button
again.
Note
Subject appears
farther away.
(Wide angle)
Subject appears
closer. (Telephoto)
Zooms in or out
fast (FAST side)
Zooms in or out
slowly (SLOW side)
CAMERA
SELECT
NEAR
MANUAL
BACK LIGHT
FAR
AUTO
Focusing on a
far subject
Focusing on a
near subject
Subject
appears
brighter.