Sony VCT-SGR1 Shooting Grip - Manual (Page 44)

AUDIO Setup Menu 44
Chap
te
r 5
Men
u
Det
a
ils
METER TYPE Sets the display range of the audio level meters.
PEAK [Full Peak]: Displays 0 dBFS as the peak value.
REF [Full Ref]: Displays the reference level (+4 dBu) as
0 dB.
FINE [Fine]: Displays a scale with 0.25 dB steps and -20
dB at the center.
PEAK HOLD Sets whether or not to use the peak hold function.
ON [On]: Uses the function.
OFF [Off]: Does not use the function.
BEEP (PHONE)
Sets the volume of the
beep tone. ALARM Sets whether or not to output alarm tones.
OFF [Off]: Does not output alarm tones.
HIGH [High]: Outputs high-level alarm tones.
LOW [Low]: Outputs low-level alarm tones.
WARN Sets whether or not to output warning tones.
OFF [Off]: Does not output warning tones.
HIGH [High]: Outputs high-level warning tones.
LOW [Low]: Outputs low-level warning tones.
INPUT DELAY
Recording audio
signal phase setting ANALOG Sets whether or not to add a delay to the ANALOG audio
input.
OFF [OFF]: Does not add delay.
ON [ON]: Adds delay.
INPUT DELAY Sets the delay length for items set to be delayed.
0 [NO DELAY]: Does not add delay.
+1 [+1F Delay]: Records the audio signal with a delay of
1 frame (use this when the input video signal has a
delay of one frame with respect to the audio signal).
+2 [+2F Delay]: Records the audio signal with a delay of
2 frames (use this when the input video signal has a
delay of two frames with respect to the audio signal).
+3 [+3F Delay]: Records the audio signal with a delay of
3 frames (use this when the input video signal has a
delay of three frames with respect to the audio signal).
+4 [+4F Delay]: Records the audio signal with a delay of
4 frames (use this when the input video signal has a
delay of four frames with respect to the audio signal).
+5 [+5F Delay]: Records the audio signal with a delay of
5 frames (use this when the input video signal has a
delay of five frames with respect to the audio signal).
Setting Item Settings