Sony VCT-SGR1 Shooting Grip - Manual (Page 19)

Mount Control Panel on the F65 19
Cha
p
te
r 2
P
rep
ar
at
ion
Attach the Control Panel (SRK-CP1, Option) to
the F65, and connect the unit and the control
panel with the control panel cable.
1
Attach the outside bracket supplied
with the control panel to the side of the
F65, and fasten using the 4 supplied
screws (M3 × 5).
There are 2 types of outside bracket. Attach
the larger outside bracket to an F65 with a
mechanical shutter or the smaller outside
bracket to an F65 without a mechanical
shutter.
2
Attach the CP Bracket to the outside
bracket.
3
Slide the control panel into the CP
bracket.
4
Use the supplied control panel cable to
connect the unit and the control panel.
5
Use the cable clamp as shown to fix the
cable.
Note
Always turn off the power supply for the unit before
disconnecting the control panel cable and removing
the control panel.
Mount Control Panel on
the F65
Screws (M3 Ч 5)