Names of parts, Overall view, Left side view – Sony VCT-SGR1 Shooting Grip User Manual
Page 10: Overall view left side view
Names of Parts
10
Chapt
er
1
Ov
er
v
ie
w
For detailed information on functions and usage, see
the pages indicated in brackets.
1.
Lid open/close button
2.
Tally indicator
Lights up during recording.
Flashes as a warning indication when an
error or problem has occurred.
3.
POWER (power supply) indicator
Lights up in green when power to the unit is
on.
4.
EJECT button
5.
SRMemory card slot
6.
7.
LID LOCK indicator
Lights up in orange when an SRMemory card
is mounted.
1.
AUDIO INPUT CH-1, CH-2 (analog audio
input channel 1, 2) connectors (3-pin XLR,
female) and input selection switches
Set the input selection switches as follows,
depending on the type and level of the input
audio.
LINE:
For line input
MIC:
For microphone input
MIC +48V ON:
For input from microphones
with external power supply
2.
EARPHONES jack (stereo mini jack) and
LEVEL knob
Adjusts the audio level.
A warning/alarm tone is also output via this
jack when an error is detected.
3.
TC IN (time code input) connector (BNC)
Connect to the time code output connector of
an external device such as a time code
generator or VTR. Use this connector when
locking the internal time code generator to
external time code.
4.
TC OUT (time code output) connector
(BNC)
Connect to the time code input connector of
an external device such as a time code reader
or VTR. Signal is supplied according to
setting made from TC Setup menu, OTHERS
>TC OUT.
5.
AUX IN (for future use)
6.
Docking screws
7.
CAMERA connector
8.
CTRL PANEL (Control Panel) connector
9.
AUX OUT connector (for future use)
Names of Parts
Overall View
1
4
5
7
6
2 3
Left Side View
3
2
1
9
8
7
6
4 5