Sony a7 II Mirrorless Camera with 28-70mm Lens User Manual
Page 11
11
GB
D:\NORM'S JOB\SONY HA\SO17_STR-DH190_PMRF1\STR-DH190 (PMRF
01)\4726907121_GB\030PAR.fm
masterpage: Right
STR-DH190
4-726-907-
12
(1)
BLUETOOTH PAIRING
(page 22)
Switches the input of the receiver to
“BLUETOOTH” and sets the receiver to
the pairing mode.
TUNER PRESET 1, 2, 3 (page 25)
Selects preset station 1, 2, or 3. When
you press any of these buttons, the
receiver turns on and tunes to the
selected preset station.
BASS +/– (page 20)
TREBLE +/– (page 20)
PURE DIRECT (page 29)
Activates the Pure Direct function
which allows you to enjoy higher-
fidelity sound from all inputs.
(enter), / / /
Press , , , to select the menu
items. Then, press
to enter the
selection.
BACK
Returns to the previous menu.
DIMMER
Adjusts the brightness of the display
panel.
AMP MENU
Displays the menu on the display panel
to operate the receiver.
(muting)
Turns off the sound temporarily. Press
the button again to restore the sound.
(volume) +*/–
Adjusts the volume level of all speakers
at the same time.
/
(fast rewind/fast
forward),
(play/pause)*,
/
(previous/next),
(stop)
Search, play, pause, skip, stop
operation.
TUNING +/–
Scans a FM station.
PRESET +/–
Selects preset stations or channels.
MEMORY*
Stores a station that you are receiving
as a preset station.
* The
+,
, and MEMORY buttons have
tactile dots. Use the tactile dots as reference
when operating the receiver.
• The above explanation is intended to serve as
examples.
• Depending on the model of your connected
device, some functions explained in this section
may not work with the supplied remote control.
To insert batteries into the remote
control
Insert two R03 (size AAA) batteries
(supplied) in the remote control. Make sure
that the + and – ends are in the correct
position when installing batteries.
• Do not leave the remote control in an extremely
hot or humid place.
• Do not use a new battery with an old one.
• Do not mix manganese batteries and other
kinds of batteries.
• We recommend that you use AAA manganese
batteries.
• Do not expose the remote control sensor on the
front panel of the receiver to direct sunlight or
lights. Doing so may cause a malfunction.
• If you do not intend to use the remote control for
an extended period of time, remove the
batteries to avoid possible damage from battery
leakage and corrosion.
• When the receiver no longer responds to the
remote control, replace both of the batteries
with new ones.
Note
Note