Roland AX-Edge 49-Key Keytar Synthesizer (White) - Manual (Page 9)

Playing
Selecting a Sound
(Program)
The sounds (programs) of the AX-Edge are organized into ten
category, with 32 programs in each category.
1.
Press the [EDGE LEAD] – [VOCODER/VOICE] buttons to
select the category.
2.
Use the [–] [+] buttons to switch programs.
Category number Program number within the category
MEMO
5 If you keep on holding down one button while pressing the other, the
value change accelerates.
5 You can also switch categories by holding down the [SHIFT] button
and using the [–] [+] buttons .
5 You can switch programs by using the PROGRAM [–] [+] buttons
located in the neck control section.
Registering Frequently-Used Sounds
to Buttons
(FAVORITE)
“Favorite” is a function that lets you register frequently-used
sounds (programs) so that they can be recalled by a single button.
The Favorite registers the number of the program.
Favorite Bank 9
Favorite Bank 0
Favorite 0–9
MEMO
5 With Favorites 0–9 as one set, you can register a total of ten sets in the
Favorite banks.
5 Use the ten buttons [0] – [9] to recall or register programs.
NOTE
If you’re editing a program, save that program first before you register
it as a Favorite.
Registering a Favorite
1.
Select the program that you want to register.
2.
Press the FAVORITE [BANK] button to make it light.
3.
Press a [0] – [9] button to select the registration-
destination bank.
4.
Hold down the FAVORITE [ON] button and press the [0] –
[9] button in which you want to register the program.
The currently selected program is registered to that button.
Recalling a Favorite
1.
Press the FAVORITE [ON] button to make it light.
The [0] – [9] buttons act as Favorite select buttons.
When the FAVORITE function is on, the bank/number display
shows the following.
1 - 3
Bank number Favorite number
2.
Press a [0] – [9] button to select a Favorite.
If you press a button in which a Favorite has not yet been
registered, the screen indicates “Not Registered!”
Switching the Favorite Bank
1.
Press the FAVORITE [BANK] button to make it light.
The button ( [0] – [9] ) corresponding to the currently selected
bank blinks.
2.
Press a [0] – [9] button to select a bank.
MEMO
If only the bank number is shown in the display, use the [0] – [9] buttons
to select a favorite.
Deleting a Favorite
1.
Switch to the bank in which the favorite is registered.
2.
Press the FAVORITE [ON] button to make it light.
3.
While holding down the [SHIFT] button , press the single
[0] – [9] button in which the favorite is registered.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button .
If you press a button in which no favorite is registered, the screen
indicated “Not Registered!”
4.
Press the [ENTER] button .
A confirmation message appears once again.
5.
To execute, press the [ENTER] button once again.
9
Owner’s Manual