Restoring backup data (restore), Adding sounds (import tone), Returning to the factory settings (factory reset) – Roland AX-Edge 49-Key Keytar Synthesizer (White) User Manual
Page 19: Initializing the user data (reset usr data), Restoring backup data, Restore), Adding sounds, Import tone), Returning to the factory settings, Factory reset)
Restoring Backup Data
(RESTORE)
Here’s how user data that you backed-up on a USB flash drive can be
returned to the AX-Edge. This operation is called
“restore.”
NOTE
5
All user data are rewritten when you execute the restore operation. If
your AX-Edge contains important data, assign it a different name and
back it up to an USB flash drive before you restore.
5
Never turn off the power or remove the USB flash drives while the
screen indicates
“Executing....”
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“UTILITY,”
and
then press the
[ENTER] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select
“RESTORE,”
and
then press the
[ENTER] button
.
4.
Use the
[–] [+] buttons
to select the file that you want to
restore.
5.
Press the
[ENTER] button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
6.
To execute, press the
[ENTER] button
.
When the restore operation is finished, the screen indicates
“Completed. Turn off power.”
7.
Turn the power of the AX-Edge off and then on again.
Adding Sounds
(IMPORT TONE)
Tones that you downloaded or tones that you exported from
another device can be imported into the AX-Edge as additional
sounds.
Here we explain how to import an SVZ file that you prepared using
the export function of another device.
1.
Save the SVZ file of tones that you imported in the
ROLAND/SOUND folder of your USB flash drive, and
connect it to the AX-Edge.
2.
Press the
[MENU/WRITE] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select
“UTILITY,”
and
then press the
[ENTER] button
.
4.
Use the
cursor [
K
] [
J
] buttons
to select
“IMPORT TONE,”
and then press the
[ENTER] button
.
5.
Use the
[–] [+] buttons
to select the file containing the
tones that you want to import, and press the
[ENTER]
button
.
6.
Use the
[–] [+] buttons
to select the tone that you want
to import, and press the
[ENTER] button
to add an
“*”
symbol.
7.
Press the
[
J
] button
.
8.
Use the
[–] [+] buttons
to select the import-destination
tone, and press the
[ENTER] button
to add an
“*”
symbol.
* Be aware that the tone selected as the import-destination will be
overwritten.
* If there is a tone named
“INIT TONE,”
it is automatically selected as the
import-destination tone. (A
“+”
symbol is automatically added.) If you
want to keep that tone, clear the check mark.
* If you want to select/clear all of the tones, hold down the
[SHIFT]
button
and press the
[ENTER] button
.
9.
Press the
[
J
] button
.
10.
To execute, press the
[ENTER] button
.
When the import is completed, the display indicates
“Import-
Completed!”
* Never turn off the power or disconnect the USB flash drive while
an indication such as
“Executing…”
is shown and processing is in
progress.
Returning to the Factory Settings
(FACTORY RESET)
Here’s how the settings that you edited and saved on the AX-Edge
can be returned to their factory-set condition.
* When you execute this operation, all the settings that you modified
after purchasing the AX-Edge, including the sound parameters, are
lost.
* If you will later need the current settings, be sure to use the backup
function p. 18) to save the current settings before you restore the
factory settings.
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“UTILITY,”
and
then press the
[ENTER] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select
“FACTORY RESET,”
and then press the
[ENTER] button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
4.
Press the
[ENTER] button
.
A confirmation message appears once again.
5.
To execute, press the
[ENTER] button
once again.
6.
When the LCD display indicates
“Completed.”
turn the
AX-Edge’s power off and on again.
Initializing the User Data
(RESET USR DATA)
If a WAVE EXPANSION is installed, you can initialize the settings and
data other than the user licenses and WAVE EXPANSION data.
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“UTILITY,”
and
then press the
[ENTER] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select
“RESET USR
DATA,”
and then press the
[ENTER] button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
4.
Press the
[ENTER] button
.
A confirmation message appears once again.
5.
To execute, press the
[ENTER] button
once again.
6.
When the LCD indicates
“Completed.,”
turn the power of
the AX-Edge off and then on again.
19
Owner’s Manual