Initializing the user licenses (remove license), Formatting a usb flash drive (usb mem format), Editing the system settings (system) – Roland AX-Edge 49-Key Keytar Synthesizer (White) User Manual
Page 20: Saving the system settings (system write), Viewing the program version (version info), Initializing the user licenses, Remove license), Formatting a usb flash drive, Usb mem format), Editing the system settings
Other Functions
Initializing the User Licenses
(REMOVE LICENSE)
If a WAVE EXPANSION is installed, you can initialize the user licenses
and WAVE EXPANSION data.
If you initialize the user licenses, you’ll be able to import and install a
SOUND PACK or WAVE EXPANSION that was downloaded with a new
user license.
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“UTILITY,”
and
then press the
[ENTER] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select
“REMOVE
LICENSE,”
and then press the
[ENTER] button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
4.
Press the
[ENTER] button
.
A confirmation message appears once again.
5.
To execute, press the
[ENTER] button
once again.
6.
When the LCD indicates
“Completed.,”
turn the power of
the AX-Edge off and then on again.
Formatting a USB Flash Drive
(USB MEM FORMAT)
NOTE
5
If the USB flash drive contains important data, be aware that this
operation erases all data from the drive.
5
Never turn off the power or remove the USB flash drives while the
screen indicates
“Executing....”
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“UTILITY,”
and
then press the
[ENTER] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select
“USB MEM
FORMAT,”
and then press the
[ENTER] button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
4.
To execute, press the
[ENTER] button
.
A confirmation screen appears once again.
5.
Press the
[ENTER] button
once again.
When formatting is complete, the screen indicates
“Com-
pleted!”
The folder structure of a USB flash drive
ROLAND
AX-Edge
BACKUP
SOUND
SONG LIST
To import tones, place them in the
SOUND folder.
To play songs from a USB flash drive,
place them in the SONG LIST folder.
The backed-up data is saved in the
BACKUP folder.
Editing the System Settings
(SYSTEM)
Here’s how to edit system parameters.
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“SYSTEM,”
and
then press the
[ENTER] button
.
3.
Use the
cursor [
K
] [
J
] buttons
to select the parameter
that you want to edit, and use the
[–] [+] buttons
to edit
the value.
For details, refer to
“Parameter Guide (English)”
(PDF).
Saving the System Settings
(System Write)
1.
In the SYSTEM screen, hold down the
[SHIFT] button
and
press the
[MENU/WRITE] button
.
A confirmation message appears.
If you decide to cancel, press the
[EXIT] button
.
2.
To save, press the
[ENTER] button
.
Viewing the Program Version
(VERSION INFO)
Here’s how to view the version of the AX-Edge’s system program.
1.
Press the
[MENU/WRITE] button
.
2.
Use the
cursor [
K
] [
J
] buttons
to select
“VERSION INFO,”
and then press the
[ENTER] button
.
20