Roland AIRA Compact J-6 Chord Synthesizer - Manual (Page 10)

Using the Sequencer
10
Deleting the contents of a step
1. Press the step [1]–[8] buttons.
2. Press the note or chord’s keyboard button to delete from the keyboard buttons that are lit.
The note for the selected key button is deleted.
In the case of chords, all of the chord’s notes are deleted.
* If there is a note or chord outside of the octave range shown by the keyboard buttons, the keyboard buttons light up dimly.
Hold down the [SHIFT] button and press the [C# (OCTAVE-)] or [D# (OCTAVE+)] buttons on the keyboard to switch octaves,
and when the keyboard button turns lit, you can delete it.
* Press the [G (CLEAR)] button on the keyboard while holding down the [SHIFT] button to delete all note and phrase data at
once.
Ø Using the Phrase Function (P.17)
Setting the tempo
The tempo is always shown on the display.
1. Turn the [TEMPO/VALUE] knob.
2. Hold down the [SHIFT] button and turn the [TEMPO/VALUE] knob to fine-tune the value in decimal
points.
You can set a different tempo for each pattern.