Roland AIRA TR-6S Rhythm Performer - Manual (Page 33)

33
Initializing, Backing-Up, Restoring
Returning to the Factory Settings
(FACTORY RESET)
Here’s how to return the TR-6S to its factory-set state.
NOTE
Be aware that when you execute FACTORY RESET: ALL, the user
sample tones and user sample data are also erased.
1 Press the [UTILITY] button to make it light.
The UTILITY screen appears.
2 Use the [VALUE] knob to select “UTILITY: Factory
Reset ”
3 Press the [VALUE] knob.
The target select screen appears.
Target Explanation
ALL
Returns all settings including patterns and kits
to their factory-set state.
KIT
Returns only the kit settings to their factory-set
state.
PTN
Returns only the patterns to their factory-set
state.
MEMO
You can also access the target select screen by holding down the
[CLEAR] button while you turn on the power.
4 Use the [VALUE] knob to select the target, and press
the [VALUE] knob.
A confirmation message appears.
5 To execute, use the [VALUE] knob to select “OK,”
and press the [VALUE] knob.
If you decide to cancel, use the [VALUE] knob to select “Cancel,” and
then press the [VALUE] knob.
6 When the display indicates “Completed Turn off
power ” turn the TR-6S’s power off and on again.
Backing Up Data to SD Card
(BACKUP)
* If you want to make a backup, save the data (patterns, kits, system
settings) before you proceed. The backup will not include the pattern or
kit that you’re currently editing (shown by an “*” indication) or system
settings that you have not saved.
1 Insert the SD card into the TR-6S.
2 Press the [UTILITY] button to make it light.
The UTILITY screen appears.
3 Use the [VALUE] knob to select “UTILITY: Backup ”
4 Press the [VALUE] knob.
The BACKUP:NAME screen appears.
MEMO
If a backup file already exists, the BACKUP:SELECT screen appears.
To overwrite-save, select the existing backup file and press the
[VALUE] knob.
If you select Save As and press the [VALUE] knob, the BACKUP:NAME
screen appears.
5 Edit the name if necessary.
Controller Explanation
[VALUE] knob Change the character.
[UTILITY] button Moves to the right.
[COPY] button Moves to the left.
[SHIFT] button
+ [COPY] button
Deletes one character
(Erase)
.
[SHIFT] button
+ [UTILITY] button
Inserts one character
(Insert)
.
[SHIFT] button
+ [VALUE] knob
Switches between uppercase/lowercase/
numerals.
6 When you’ve finished inputting characters, press
the [VALUE] knob.
A confirmation message appears.
7 To execute, use the [VALUE] knob to select “OK,”
and press the [VALUE] knob.
If you decide to cancel, use the [VALUE] knob to select “Cancel,” and
then press the [VALUE] knob.