Panel descriptions, Top panel/front panel – Roland XS-1HD Multi-Format Matrix Switcher User Manual
Page 6
6
Panel Descriptions
Top Panel/Front Panel
[COLOR] buttons
These buttons operate as follows according to the
screen mode.
Matrix mode / Switcher mode (p. 17)
The button applies a fade to the output video,
outputting a single-color (background color) image.
The [COLOR] button indicates the fade status.
Lit red
Faded out
Blinking red
Fading in/out
Lit white
Normal output
Layers are hidden. When layers are hidden, the
[COLOR] button is lit red.
Cross-point buttons
These buttons operate as follows according to the screen mode.
* Buttons for which valid video is being input are lit white.
These buttons switch the cross-point of the video channel.
These buttons select the video to composite.
XPT1
— (Not used.)
XPT2
These buttons select the video source used as the PinP inset screen. The color in which the button
is lit indicates the output destination of the composited result.
Lit green
Preview output only
Lit red
Final output, preview output
* The PinP inset screen can also be key-composited.
* If the AUX bus is assigned to the VIDEO OUTPUT 3 connector, these buttons select the input channel
that is sent to the AUX bus.
XPT3 (PGM)
These buttons select the final video output. The button of the channel that is being finally output is lit red.
* When compositing video, these buttons select the background video
XPT4 (PST)
These buttons select the preset video (the video that will be output next). The selected button is lit green.
MAIN level meter
This indicates the volume level of the audio output.
[TIME] knob
This knob specifies the transition time
* This is also used as the fade time of the
video output (p. 17) and the fade time when
compositing video.