Roland XS-1HD Multi-Format Matrix Switcher - Manual (Page 10)

10
Basic Operation
Turning the Power On/Off
* Before turning the unit on/off, always be sure to turn
the volume down. Even with the volume turned down,
you might hear some sound when switching the unit
on/off. However, this is normal and does not indicate a
malfunction.
Turning the power on
1.
Make sure that all devices are powered-off.
2.
On the rear panel of the XS-1HD, press the
[POWER] button to turn on the power.
3.
Turn on the power of the source devices.
Turn on the power of the source devices that are
connected to the XS-1HD’s input connectors,
such as video cameras.
4.
Turn on the power of the output devices.
Turn on the power of the devices that are
connected to the XS-1HD’s output connectors,
such as projectors.
Turning the power off
1.
Turn off the power in the order of output
devices g source devices.
2.
Press the XS-1HD’s [POWER] button to turn off
the power.
Operating the Menu
Here’s how to display the menu, and make settings
for the XS-1HD itself and for video and audio.
* The menu is shown only on the monitor that’s connected
to the VIDEO OUTPUT 4 connector.
1.
Press the [MENU] button to display the menu.
The [MENU] button is lit, and the menu categories
are displayed.
2.
Turn the [CURSOR] knob to select a category,
and press the [ENTER] button to confirm.
The menu items of the selected category are
displayed.
3.
Turn the [CURSOR] knob to select a menu item.
5 If the menu extends across multiple pages, you can move
in units of pages by turning the [CURSOR] knob while
pressing it.
5 If the value area indicates “Enter,” you can press the
[ENTER] button to proceed to a lower level.
Alternatively, pressing the [ENTER] button executes an
operation.
4.
Turn the [VALUE] knob to change the value of
the setting.
* By turning the [VALUE] knob while
pressing it, you can change the value
more greatly.
5 If you hold down the [ENTER] button and press the
[VALUE] knob, the selected menu item returns to the
default setting.
If you hold down the [ENTER] button and long-press the
[VALUE] knob, all menu items in the same level return to
the default setting.
5.
Press the [MENU] button several times to close
the menu.
5 Pressing the [MENU] button once takes you back to the
previous screen.
MEMO
For details on the menu items, refer to the “Reference
Manual” (PDF) which you can download from the Roland
website.
https://proav.roland.com/
About the auto-off function
If 240 minutes pass while the XS-1HD remains
in the following state, the power turns off
automatically (auto-off function).
5 The XS-1HD is not operated
5 Audio or video are not input
5 No output device is connected
If you do not want the power to be turned off
automatically, disengage the Auto Off function.
[MENU] button g “System” g set “Auto Power
Off ” to “Disabled.”
NOTE
5 Any settings that you are in the process of editing will
be lost when the power is turned off. If you have any
settings that you want to keep, you should save them
beforehand.
5 To restore power, turn the power on again.