Roland XS-1HD Multi-Format Matrix Switcher - Manual (Page 13)

13
Video Operations
Output examples
Four
outputs
INPUT
OUTPUT
When using four outputs, video transitions are separated by the
background color.
Video transition time
Background color
Seamless
transitions
OUTPUT
No signal
INPUT By restricting the outputs, you can perform seamless video
transitions that use dissolve.
Restrict to three outputs: Seamless video transition is possible for one
screen.
Restrict to two outputs: Seamless video transition is possible for two
screens simultaneously.
Settings
[MENU] button g “System” g use “XPT Assign” to turn “Off” the cross-
point of the outputs that you want to restrict.
In the example shown at left, the “HDMI 3” cross-point is turned “Off.”
Spanning
INPUT
OUTPUT
By combining cross-points and outputs, 2–4 screens can be spanned.
Settings
[MENU] button g “System” g use “XPT Assign” to specify the same
cross-point for the outputs that you want to span.
In the example shown at left, the cross-points of “HDMI 1”–”HDMI 4”
are set to “XPT 4.”
* By restricting the outputs, you can perform seamless video
transitions that use dissolve.
Switching in Matrix Mode
Use the cross-point buttons to switch the combination of four inputs and four outputs, and output the video.
The internal frame synchronizer allows seamless video switching.
Operating procedure
1.
As described in “Switching the screen mode”
on the previous page, set the screen mode to
Matrix.
2.
Use the [TIME] knob to specify the video
transition time.
3.
Press a cross-point button.
The output video is switched.
MEMO
You can individually specify the scaling for each video
output. [MENU] button g “Output” g “Output 1” – “Output
4” g [ENTER] button g adjust the various Scaling items.
5 You can also use the quick edit function to specify the
scaling (p. 19).